12A Contact Dim Unit

To view pricing, please sign up for a trade account
Product Description

This dimmer can control 12V or 24V single colour LED Linear Strip, it has a 10Amp maximum load and is controlled by almost any momentary contact switch. This unit can be connected to Bright Light LED repeaters to expand your lighting installation.

BRIGHT LIGHT CODE LT-701-12A
MAX. LOADING 120W for 12V
240W for 24V
VOLTS  12V and 24V DC Constant Voltage 
AMPS  12A 
OPERATION TEMP.  -30ºC ~ +55ºC
RUNNING TEMP.  25ºC 
DIMENSIONS  W44mm x H30mm x L175mm 
HOUSING   Plastic housing
2 x mounting hole 
INGRESS PROTECTION  IP20 Indoor Use Only 
CONNECTION METHOD  Enclosed screw terminals and terminal block for quick connection 
DIMMING/SYSTEM CONTROL  0-100% Dimmable output. Dimming controller for 12V or 24V single colour LED Linear Strip.
PROTECTION   Open circuit, short circuit, overload and over temperature protection
MAX. RUN POWER FEED Under 10 metres is recommended to avoid voltage drop over long runs 
WARRANTY  5 Years 
FUNCTION
  • Auto restart after fault, after conditions removed
  • For control of larger loads use multiple Contact Dim Units
  • Cable size may need to be specified to limit the voltage drop throughout the circuit

Compatible push mech switches Bright Light have tested with the LT-701-12A so far include:

  1. Schneider Electric
  2. Satin Horizon
  3. Slimline 30 PBBL
  4. PDL 681 MT 10 PB 
  5. Modena 850 MT IS PB

Your local electrical supplier will be able to advise other brands of switching that will work in the 
same way. 

This product does not isolate the 230volt feed to the power supply. Momentary contact switch is 
not included with the LT-701-12A.

Related Products